field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Quality Control Inspector
Creative Composites Group – Composite Advantage – Dayton, Ohio
The Quality Control Inspector position is critical in ensuring that all products meet customer expectations by assuring the quality of finished parts and conformance to product requirements. This is done by inspecting parts and documenting inspections and non-conformances. The Quality Control Inspector will interact daily with Operators, Supervisors and Management Staff.
Essential Functions
· Perform first piece, in-process, and final inspections.
· Receiving raw material inspections and testing.
· Blueprint interpretation
· Document Control
· Photographic documentation of materials
· Audit ERP lot number and work order completions for ISO compliance.
· Provide QC data for customer submissions.
· Identify non-conformances and generate QC reports.
· Lead further activities when non-conformance product/material is identified.
· Communicate with Quality Manager and Production Supervisor when non-conforming processes and/or product are identified.
· Responsible for observing all applicable safety requirements. Promotes and maintains a safe work environment; reinforces safety standards and sets the example for PPE, safety training and safe work practices.
Other Duties:
Please note this job description is not intended to be a complete or exclusive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Supervisory Responsibility
This position has no supervisory responsibility.
Work Environment
While performing the duties of this job, the employee is frequently exposed to fumes or fiberglass and airborne particles, forklift movements and overhead crane usage. The noise level in the work environment and job sites can be loud. The employee will use the following tools and equipment to perform his/her job: tape measures, calipers, steel detector, Barcol reader, angle finder, angle grinder, cordless drills, appropriate PPE, flashlight, and stencils.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stoop; bend; climb on top and under parts; twist on a regular basis; stand for prolonged periods of time; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision and ability to adjust focus, as well as the ability to see and respond to potential worksite hazards. This position requires the ability to lift up to 50 pounds.
Travel
Occasional travel is expected for this position. The employee must have a valid driver’s license.
Education and Experience
· 2+ years of ISO 9001 experience preferred
· 2+ years of experience using measuring devices (tape measure, calipers, gauges, etc.)
· Basic computer skills (Email, Microsoft Office, ERP experience is a plus)
Additional Eligibility Qualifications
· Ability to read measurements in English and Metric.
· Ability to count and perform simple math operations.
· Read/interpret blueprints, CAD drawings and work orders.
· Exceptional oral and written communication skills
· Strong interpersonal and organizational skills.
· Attention to detail.
· Positive attitude. Pleasant demeanor when interacting with co-workers.
EEO Statement
Composite Advantage is an equal opportunity employer, and does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, veteran or marital status, or based on any individual's status in any group or class protected by applicable federal, state or local law. The company also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local laws Keywords Quality, Quality Control, Inspector, Quality Inspector, Document Control, Production Quality, Manufacturing, Production
Powered by JazzHR
erF6VS2x41

Quality Control Inspector

<h3>Job Description</h3>
Job Description
Hey there! Are you someone who loves making things run smoother, faster, and more efficiently? Do you get a thrill out of eliminating waste, improving processes, and helping teams work smarter—not harder? If so, we need you as our Lean Manufacturing Leader! 
What You’ll Be Doing: 
Think of yourself as the driving force behind making our manufacturing operations top-notch. You’ll be leading continuous improvement efforts, running Kaizen events, and helping teams spot and eliminate inefficiencies. You’ll be the go-to person for all things Lean—whether it’s 5S, Six Sigma, value stream mapping, or Just-In-Time (JIT). 
Here’s what your days might look like: 
<ul>
<li>Leading Lean transformation projects that boost productivity and cut costs.</li>
<li>Training and mentoring teams so they can apply Lean principles in their daily work.</li>
<li>Working with production, engineering, and quality teams to standardize processes and make sure we’re always improving.</li>
<li>Diving into data and KPIs to find areas where we can do better.</li>
<li>Partnering with leadership to create a culture where continuous improvement is the norm—not the exception.</li>
</ul>
What We’re Looking For: 
<ul>
<li>You’ve got at least 5 years of experience in Lean Manufacturing, Continuous Improvement, or something similar.</li>
<li>A Bachelor’s degree in Engineering, Manufacturing, Business, or a related field (bonus points if you have a Master’s!).</li>
<li>A Lean Six Sigma Green Belt or Black Belt—or you’re on your way to getting one.</li>
<li>Experience leading Kaizen events and cross-functional projects.</li>
<li>You’re great at spotting inefficiencies and know how to use Lean tools to fix them.</li>
<li>You know how to motivate teams and influence change across all levels of an organization.</li>
<li>You love digging into data and process improvement tools to make smart decisions.</li>
</ul>
Why You’ll Love It Here: 
<ul>
<li>You’ll have the chance to make a real impact on how we operate.</li>
<li>We believe in a collaborative, forward-thinking culture—your ideas will be heard.</li>
<li>Competitive pay, great benefits, and room to grow!</li>
</ul>
Access to our Aerospace facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. 
 Abrasive Technology is a substance and drug free workplace. All offers of employment are contingent on passing a pre-employment drug screen. Drug testing is conducted in accordance with FAA/DOT regulations. 
 "We are an Equal Opportunity Employer. We are committed to providing a workplace free from discrimination and ensuring equal opportunity for all employees and applicants, regardless of race, color, religion, sex, national origin, disability, or veteran status."

Lean Manufacturing Leader

<h3>Job Description</h3>
Job Description&nbsp;About MXD ProcessAt MXD Process, we are a leading manufacturer of industrial processing equipment. &nbsp;As a multi-site manufacturer of tanks, mixers, skids, and fully integrated process systems, we serve global leaders in the chemical, pharmaceutical, food &amp; beverage, and specialty materials sectors. Our mission is to deliver intelligently designed equipment with performance, safety, and quality at the core. Every product we build is backed by process expertise and a relentless focus on client success. &nbsp;Position Overview The Quality and Safety Manager is a hands-on leadership role responsible for ensuring that every product we fabricate and every site we operate meets or exceeds the highest standards of quality, safety, and compliance. From pressure-rated tanks to modular process skids, this role drives continuous improvement across our fabrication shops, engineering processes, and field operations. As a key member of the MXD Process team, you will lead both quality assurance and safety strategy—developing scalable systems, ensuring regulatory alignment, and fostering a zero-incident culture throughout our operations.&nbsp;Key Responsibilities&nbsp;Quality Leadership
<ul>
<li>Develop and oversee MXD Process’s Quality Management System (QMS) in alignment with Quality and ASME/3A standards.</li>
<li>Drive quality execution across all product lines—custom stainless tanks, industrial agitators, portable mix systems, skids, and turnkey systems.</li>
<li>Lead in-process inspections, weld and finish quality verification, FAT/SAT protocols, and dimensional checks on all outgoing systems.</li>
<li>Supervise and coordinate with international quality control (QC) vendors (e.g., China-based fractional inspectors).</li>
<li>Train inspection staff across facilities; establish reporting and workflow structure.</li>
<li>Analyze and close out non-conformance reports (NCRs) with root cause investigation and corrective/preventive actions (CAPA).</li>
<li>Lead customer and third-party quality audits and certification processes.</li>
</ul>
&nbsp;Safety Management
<ul>
<li>Own the implementation and continual improvement of company-wide health &amp; safety programs, ensuring OSHA compliance and site-level accountability.</li>
<li>Conduct risk assessments, incident investigations, and assign shop-floor safety audits across all locations.</li>
<li>Lead training for safety-critical procedures such as LOTO, hoisting, hot work, PPE protocols, confined space, and equipment safety.</li>
<li>Maintain compliance records, injury logs, SDS documentation, and emergency preparedness plans.</li>
</ul>
&nbsp;Cross-Site Standardization
<ul>
<li>Create alignment across multi-site operations, embedding consistent quality and safety practices into every tank weld, mixer build, and system integration.</li>
<li>Support the launch of new production cells or shop expansions by developing scalable safety and quality procedures.</li>
</ul>
&nbsp;What You Bring
<ul>
<li>Bachelor’s degree in Engineering, Industrial Safety, Quality Management, or a related discipline with 5+ years of experience in industrial fabrication or equipment manufacturing, with direct responsibility for quality and safety programs.</li>
<li>Degree may be substituted with 8+ years experience.</li>
<li>Strong working knowledge of metal fabrication, sanitary design, pressure-rated equipment, and custom-engineered systems.</li>
<li>Experience implementing ISO, OSHA, and ASME programs; QMS certification</li>
<li>Excellent communicator and motivator—able to lead cross-functional teams, train frontline operators, and represent MXD Process in customer-facing quality matters.</li>
</ul>
&nbsp;What We Offer
<ul>
<li>A fast-paced, engineering-forward environment with a high degree of autonomy.</li>
<li>The opportunity to make an impact at scale—ensuring that systems used in critical industries are built to perform safely and flawlessly.</li>
<li>Competitive salary, benefits package, and opportunities for professional development.</li>
<li>A culture rooted in helpfulness, trust, and purposeful collaboration. &nbsp;</li>
</ul>
Travel Expectations This role supports multiple MXD Process locations and requires up to 30% travel across MXD facilities in Ohio and Indiana, system integration sites, and customer test locations.&nbsp;Ready to Lead Quality and Safety at the Core of Innovation? Join MXD Process and help us engineer excellence—safely, reliably, and with confidence in every weld and every workflow. 
Compensation details: 70000-100000
 
PI9630e3c27f9b-25405-37928248

Quality and Safety Manager

<h3>Job Description</h3>
Job Description
2nd Shift and 3rd shifts (Swing Shift)
We are continuing to grow and are looking for Skilled Maintenance Technicians to join our team. We are passionate about what we do and work hard at it. We are looking for a team player who will contribute not only to our team’s production, but to our culture as a whole.
Responsibilities for Maintenance: • Preventative maintenance of all equipment • Must be willing to take additional training pertaining to Maintenance • Must be willing to cross train and perform other duties as required. Qualifications for Skilled Maintenance Technicians: • Able to repair electrical systems, PLC's, AC Drives, refrigeration equipment, and processing and filling equipment • Maintenance background that should include experience in pneumatics, hydraulics and welding • Must have good communication skills and be responsible for quality work • Must be able to pass pulmonary function test • Must learn and work with ammonia refrigeration • High School diploma preferred • GED assistance available
Company DescriptionWe are a firm focused in the STEM Talent Arena; Science, Technology, Engineering and Math. We build and have long term relationships with our clients and represent our clients transparently. We pride ourselves in understanding a candidate's skill set, and the culture and work environment that is a best fit for both the candidate and the client. 
<h3>Company Description</h3>
We are a firm focused in the STEM Talent Arena; Science, Technology, Engineering and Math.\r\n\r\nWe build and have long term relationships with our clients and represent our clients transparently. We pride ourselves in understanding a candidate's skill set, and the culture and work environment that is a best fit for both the candidate and the client.

Industrial Maintenance Technician

<h3>Job Description</h3>
Job Description
Unique opportunity as Machine Technician for a highly automated operation producing parts for the automotive industry. As part of the Engineering Department, you are responsible for quality output of production machinery that includes robots, high speed assembly and a variety of manufacturing operations. An overall knowledge of PLC's is key, with a good mechanical knowledge. This is a clean, environmentally controlled operation, that can provide opportunities for career growth. Ability to work off-shifts. Must have experience with: PLC's Repair Robots AC/DC drives Adjust, repair, changeover, and start-up of machinery Electrical and Mechanical experience

Robot Machine Technician

<h3>Job Description</h3>
Job Description
This opportunity is on 1st Shift, Monday - Friday 6am - 2:30pm
 Jergens, Inc. has been a strong presence in the manufacturing industry for over 75 years, becoming one of the world’s largest manufacturers of standard tooling components, vises and other workholding equipment. Jergens has career opportunities for anyone interested in manufacturing and we are looking for individuals who are motivated, team-oriented, and passionate about growing or starting their career in manufacturing!
 Our work culture:
 Jergens, Inc., is a privately owned manufacturer founded by the Schron Family in 1942. Headquartered in Cleveland, OH, Jergens has a global reach, with activities across 4 continents and 30+ countries around the world.
 Through the many changes over the past 75 years, one thing has remained a constant – the core values of Jergens. A dedication to:
 • Honesty
• Hard work
• Excellence in all we do
• A commitment to family
These values are the foundation upon which the company was built, the standard for how every Jergens employee conducts themselves today and will continue to set the direction into the future as we continue to grow our family of employees.
 About Jergens, Inc.
 Jergens, Inc. is comprised of 3 distinct business units: Workholding Solutions, Lifting Solutions and Specialty Fasteners. Building on its reputation of uncompromising quality standards, Jergens is committed to helping its customers achieve leaner, more profitable manufacturing, and continues to add products and engineered solutions for an integrated approach to “Manufacturing Efficiency.” To learn more about Jergens, Inc., visit us at <a href="http://www.jergensinc.com&amp;nbsp" target="_blank">www.jergensinc.com&amp;nbsp</a>;
 Also, be sure to check out our video to see what it's like to work at Jergens: <a href="https://youtu.be/UVkHTp6OH54&amp;nbsp" target="_blank">https://youtu.be/UVkHTp6OH54&amp;nbsp</a>;
 Benefits of Working at Jergens, Inc.
 • Competitive compensation
• Comprehensive insurance benefits package (including medical, dental and vision coverage as well as company paid life insurance and disability)
• Tuition reimbursement
• Fun staff events and activities
• 401k plan with profit sharing
• Paid vacation time starting at 13 days
• 11 paid holidays&nbsp;
 Responsibilities&nbsp;
 • Has a thorough understanding of our company’s products, assembly operations and procedures. Assists less experienced&nbsp;
assembly employees by providing information, as necessary.&nbsp;
• Works from blueprints, routed shop orders, set up card data, verbal and written instructions.&nbsp;
• Able to use ordinary arithmetic such as decimals and fractions, micrometers and fixed gages.
• Plans and performs required set up of equipment to assemble product.
• Assembles product in an efficient manner and inspects product to verify that it meets customer specifications, with minimal&nbsp;
direction from the supervisor.
• Identifies and resolves routine and some non-routine issues through effective troubleshooting.
• As needed, handles incoming and out-going stock.
• Maintains accurate counts of work in process, components, and sub-assemblies and properly log all rejected parts used during&nbsp;
assembly to maintain accurate inventory counts.
• Communicates effectively with co-workers and internal customers in performing assigned tasks. Assists less experienced&nbsp;
assembly employees with more complex issues.
• Keeps the supervisor aware in a timely manner of any issues needing the supervisor’s involvement.
• Performs assignments in a timely and efficient manner while meeting customer quality expectations.
• Maintains timely and accurate records and reports, as required.
• Maintains good housekeeping and safety habits.
 Requirements
• High school education is required.&nbsp;
• Has the ability to be proficient after training.
• Has at least 2 years of experience with the company fully meeting the expectations of an Assembler or one year of successful&nbsp;
directly related experience within another company function or organization.
• Has excellent communications and interpersonal skills to be able to interact effectively with others to meet customer needs
• Ability to perform basic math calculations such as decimal/fraction conversions and reading measuring tools.&nbsp;
• Must have manual dexterity to handle small objects as well as large objects and the ability to maintain mental concentration&nbsp;
while performing repetitive work.
• Must have the ability to maintain mental concentration while performing repetitive work.&nbsp;
• Has moderate computer skills and is proficient with all related company systems and programs.
• Can demonstrate moderate analytical and problem-solving abilities to meet the requirements of the position.
• Effective time management skills in prioritizing and addressing multiple and at times conflicting demands.
• High energy with a sense of urgency in responding to customer needs.
• High level of personal and professional integrity.
• Is committed to the company’s values.
• Attention to detail in maintaining required records and reports.
Company DescriptionJergens consists of three unique divisions, that provide superior solutions, products &amp; services to customers around the globe. Jergens continues to be on the forefront of manufacturing. For over 75 years our core values have remained constant: a dedication to honesty, hard work, excellence in all we do and a commitment to family. 
<h3>Company Description</h3>
Jergens consists of three unique divisions, that provide superior solutions, products &amp; services to customers around the globe. Jergens continues to be on the forefront of manufacturing. For over 75 years our core values have remained constant: a dedication to honesty, hard work, excellence in all we do and a commitment to family.

Mechanical Assembler

<h3>Job Description</h3>
Job DescriptionFrom smartphones to solar panels, innovative technology is needed to create the devices we use every day. Silfex’s silicon components help make that technology a reality.
At Silfex, we’re the leading provider of precision silicon components used to make and operate semiconductor tools, which enable the trillion-dollar global electronics industry. Our company’s products are integral to the semiconductor equipment and optical markets. The outstanding team at Silfex makes that possible – through our people, we help connect the world. 
The successful candidate for this position will become eligible for a comprehensive set of outstanding benefits; to learn more about the benefits Silfex offers for this position check out:
<a href="https://www.lambenefits.com/" target="_blank">https://www.lambenefits.com/</a>
Join our team and help us connect the world and support the technology of the future!
Essential Function:
Our machinist at Silfex are integral in making our high quality precision silicon components. As a machinist you will be responsible for safely setting up and operating 5-axis CNC machines to produce the highest quality parts and meet the customer expectations, in the most efficient manner. 
<ul>
<li>Operate 3 to 5-axis CNC machine tools to accurately machine parts per work instructions and per manufacturing plan.</li>
<li>At all times utilize appropriate Personal Protection Equipment (PPE.) (e.g., shoes, gloves, masks, etc.) to minimize exposure to hazards that cause serious workplace injuries and illnesses.</li>
<li>Perform quality inspections to ensure accurate production of parts throughout the process.</li>
<li>Handles parts and materials with great care as well as maintaining cleanliness of them to ensure quality of product and condition of equipment. </li>
<li>Proactively supports work of department and team by maintaining communication through Teams/ Email and participating in shift change meetings; demonstrating collaboration and problem-solving attributes. </li>
<li>Accurately record and interpret production information in PLEX such as verifying track numbers, substitute part revision, and machine down time, (etc.).</li>
<li>Utilize systems to document and review information, including maintenance dispatch, completed Preventative Maintenance, and document measurement scans. </li>
<li>Produces parts according to standards by utilizing production documentation, correctly loading, and unloading parts on machine, and verifying part orientation.</li>
<li>Strictly work instructions, setup sheets and other production related information.</li>
<li>Perform assigned preventative maintenance and maintain coolant lines and nozzle positioning.</li>
<li>Set up machines for production to ensure they’re operating correctly. </li>
<li>Assist in applying lean manufacturing concepts and 5S. Demonstrate ownership of continuous improvement ideas and activities. </li>
<li>Performs other job duties as assigned. </li>
</ul>
 
Culture:
<ul>
<li>Display a positive attitude and strong work ethic that reflects the Mission and Core Values of Silfex.</li>
<li>Create and maintain a culture where workplace safety is part of everything we do. Provide the safest possible workplace to our employees by modeling and following all company safety policies, reporting any incidents or unsafe conditions immediately to Silfex management. Wear all PPE as required by work area or job function.</li>
<li>Communication – Begin with the end in mind – Communicate boldly as well as effectively with empathy and respect to inspire teamwork and collaboration vertically and horizontally within Silfex.</li>
<li>Assist in applying lean manufacturing concepts and 5S. Demonstrate ownership of continuous improvement ideas and activities. Maintain organization and cleanliness, housekeeping and 5S within work area. Maintain these areas at the highest degree possible while responsibly escalating any maintenance issues. </li>
</ul>
 
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. 
<ul>
<li>Minimum of High school diploma or GED.</li>
<li>Minimum of 1 year of CNC machining experience on 3 or 5-axis machines.</li>
<li>Must have basic shop math skills.</li>
<li>Microsoft Office experience (specifically Excel)</li>
<li>Ability to read and follow work instructions.</li>
<li>Able to perform job functions independently with frequent support.</li>
<li>Basic understanding of 5S and Lean manufacturing.</li>
<li>Detail oriented.</li>
<li>Quality and safety minded.</li>
</ul>
 
Preferred Qualifications:
<ul>
<li>Experience machining Si, glass, or other brittle material</li>
</ul>
 
Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and; talk or hear. The employee is occasionally required to lift up to 50 pounds. The employee regularly is required to lift up to 35 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job the employee is frequently exposed to work near moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the environment is moderate.
 D Shift - 6pm - 6am

CNC Machinist 2

<h3>Job Description</h3>
Job Description
RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Real Truck’s 5,000+ associates operate from 72 facilities across four continents. ARE is the company behind all your favorite fiberglass, aluminum, and tonneau covers and truck caps. You can be a part of making an awesome product!
Core Functions:
<ul>
<li>Tack &amp; Loader, buffing/sanding and light repairs.</li>
<li>Applying base coat to parts of the product. </li>
<li>Applying clear coat to parts of the product. </li>
<li>Mixing paint. </li>
<li>Clean parts of the product. </li>
<li>Moves units to and from booths. </li>
<li>Properly maintains paper work in a neat and orderly fashion. </li>
<li>Completes additional tasks as assigned. </li>
</ul>
Reasons you’ll love the RealTruck family: 
<ul>
<li>Pay starting at $22.25/hr.</li>
<li>Opportunities available with an immediate start date.</li>
<li>Work a set, full-time schedule, or flexible part-time schedule. Every weekend off!</li>
<li>Orientation &amp; training is paid.</li>
<li>Enjoy weekly pay that is direct deposited!</li>
<li>Reimbursement available for advanced learning opportunities through skilled trades programs!</li>
<li>We are fast-growing, stable company that invests in their employees and company. This is not a job, but a career that you can retire from.</li>
<li>Employee engagement – Referral bonuses, holiday parties, town halls, listening sessions, lunch &amp; learns, and more!</li>
</ul>
Education and Experience:
<ul>
<li>High School Diploma or equivalent preferred.</li>
<li>Prior bodywork experience preferred.</li>
</ul>
Please take a moment to complete our online application. 
Check us out at <a href="http://www.4are.com/careers" target="_blank">www.4are.com/careers</a>

Painter - Friday & Saturday

<h3>Job Description</h3>
Job Description
Step Into Food Production—Where Precision Meets Purpose
At Sandridge Crafted Foods, we’re passionate about creating fresh, high-quality, chef-inspired foods that bring people together. As an Industrial Food Prep Operator, you won’t just be cutting vegetables—you’ll be an essential part of a team that ensures our food meets the highest standards of safety, consistency, and quality. This is your opportunity to work with purpose in a clean, high-tech, fast-paced environment.
Compensation:
$16.71 - $17.27 hourly
Responsibilities:
As an Industrial Food Prep Operator, you'll be responsible for preparing, processing, and packaging fresh ingredients with care and accuracy. Your key responsibilities will include:
<ul>
<li>Prep and Precision: Cut raw vegetables according to production schedules, ensuring correct size and proper dip procedures.</li>
<li>Operate with Excellence: Set up, run, and monitor Urschel and other food processing equipment; watch for blade wear or damage.</li>
<li>Maintain Cleanliness: Follow cleanroom protocols including PPE use (hairnet, lab coat, boots) to meet hygiene and food safety standards.</li>
<li>Weigh, Label, Record: Weigh and label product precisely and document dip and drain times on HACCP paperwork.</li>
<li>Troubleshoot Efficiently: Recognize and respond to machine issues quickly to minimize downtime and maintain quality output.</li>
<li>Stay Audit-Ready: Ensure cleanliness, safety, and documentation are always prepared for internal and external audits.</li>
<li>Support the Team: Contribute to a collaborative team environment, helping others when needed and upholding Sandridge’s Core Values.</li>
</ul>
Qualifications:
What You Bring to Sandridge
<ul>
<li>Education: High school diploma or GED required</li>
<li>Experience:</li>
<li>Machine operator or food manufacturing experience preferred</li>
<li>Basic knowledge of safe food handling practices and food safety regulations is a plus</li>
</ul>
Skills:
<ul>
<li>Strong attention to detail and time management</li>
<li>Mechanical aptitude and the ability to troubleshoot minor issues</li>
<li>Basic computer and communication skills</li>
<li>Willingness to work in a fast-paced, refrigerated environment</li>
</ul>
 
Physical Requirements
This is a physically active role that requires:
<ul>
<li>Standing, walking, kneeling, and moving for 8–12 hours</li>
<li>Frequent bending, pushing, pulling, reaching, and lifting up to 65 lbs</li>
<li>Comfortable working in cool, wet, or loud environments</li>
<li>Strong hand-eye coordination and ability to perform repetitive tasks accurately</li>
</ul>
About Company 
Why Sandridge?
<ul>
<li>Be part of an innovative company leading in fresh food solutions</li>
<li>Competitive pay with the potential for extra earnings on select shifts</li>
<li>Health, dental, and vision benefits – take care of yourself while you take care of the food</li>
<li>401(k) with company match — we’re thinking long-term for you!</li>
<li>Paid time off &amp; holidays – we know you need time to recharge</li>
<li>Employee discounts – because who doesn’t love a good deal on delicious food?</li>
<li>Growth opportunities – we love promoting from within, so your career here can go places</li>
<li>Opportunity for career growth and development</li>
</ul>

Industrial Food Prep Operator

<h3>Job Description</h3>
Job Description
We are currently seeking a skilled and experienced Metal Fabricator to join our team in Zanesville, Ohio. This is not an entry-level position. We are looking for a candidate with proven experience in metal fabrication. The ideal candidate will have strong hands-on skills, a keen eye for detail, and a commitment to quality and safety.
Key Responsibilities:
<ul>
<li>
Read and interpret technical blueprints, drawings, and specifications to determine fabrication requirements
</li>
<li>
Lay out, fit, and weld fabricated metal components using hand tools and appropriate welding techniques
</li>
<li>
Perform MIG, TIG, and/or Stick welding on steel, stainless steel, and aluminum materials
</li>
<li>
Verify dimensions and tolerances of fabricated parts using calipers, rulers, levels, and other precision tools
</li>
<li>
Ensure the quality, accuracy, and structural integrity of completed assemblies
</li>
<li>
Maintain a clean, organized, and safe work environment, adhering to all OSHA and company safety standards
</li>
<li>
Communicate with supervisors regarding production status, equipment malfunctions, or safety concerns
</li>
</ul>
Qualifications:
<ul>
<li>
High school diploma or equivalent required
</li>
<li>
Technical training or welding certifications preferred
</li>
<li>
Minimum 2+ years of proven, hands-on experience in metal fabrication and welding
</li>
<li>
Proficiency in reading blueprints and technical drawings
</li>
<li>
Skilled in MIG and TIG welding; Stick welding is a plus
</li>
<li>
Familiar with metal fabrication tools, layout techniques, and equipment
</li>
<li>
Strong mechanical aptitude, attention to detail, and craftsmanship
</li>
<li>
Ability to work both independently and within a team in a fast-paced environment
</li>
<li>
Must be able to lift up to 50 lbs and handle the physical demands of the job
</li>
</ul>
Preferred Certifications (a plus, but not required):
<ul>
<li>
AWS (American Welding Society) Certification
</li>
<li>
Forklift or overhead crane certification
</li>
<li>
OSHA 10 or 30-hour safety training
</li>
</ul>
Equal Opportunity Employer
IND1

5,232 Manufacturing Jobs