field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
BASIC FUNCTION
Support the repair and the improvement of existing products by building, servicing, troubleshooting, and testing pumps and or pump system components along with analyzing test results and conducting service evaluations.
RESPONSIBILITIES AND DUTIES
• Root cause failure analysis. Communicate findings and recommendations to customers and management
• Removes, installs, diagnoses, repairs, disassembles, assembles pumps and /or pump system components in house and at job site (as the situation requires) using company provided tools
• Paint parts/pumps with water, enamel, and 2-part epoxy based paints • Test pumps and pump components; including:
• Plumb and wire pumps for testing
• Operate test equipment
• Tabulate/report test results
• Analyze test results and service evaluations
• Ensures compliance to customer specifications and company requirements
QUALIFICATIONS AND SKILLS
• High School Diploma or GED Equivalent. Two years of assembly, maintenance, or repair experience preferred.
• Knowledge of electrical wiring, including troubleshooting and repair of electrical/electronic panel equipment
• Solid mechanical aptitude and advanced troubleshooting skills with a familiarity of pumps and pump systems a plus
• Must be able to analyze data and write reports
• Ability to read blue prints and electrical schematics
• Computer skills including knowledge of Microsoft Office (Word, excel, etc.)
• Good verbal and written communications skills
• Strong attention to details
• Strong customer service skills
• Ability to travel – up to 20% of the time depending on need
• Valid drivers license to operate company vehicle
• Lifting up to 25 pounds frequently, up to 50 pounds about 2/3 of the time, and up to 100 pounds up to 1/3 of the time. Must reach, stoop, kneel, crawl, climb, and balance. These are incorporated in frequent need to lift large plumbing, parts, or pumps. Worker is assisted by cranes, hoist, or forklift for heavy or awkward loads.
You should be proficient in:
<ul>
<li>Mechanical Troubleshooting Skills</li>
<li>Electrical Troubleshooting</li>
<li>Electrical Repair</li>
</ul>

Field Service Technician

<h3>Job Description</h3>
Job Description
Company Overview:
Vogelsang USA, LTD is a leading manufacturer of high-performance rotary lobe pumps, in-line grinders, and mixing solutions engineered for demanding applications in the biogas, food and animal waste processing, wastewater treatment, and industrial liquid handling sectors. Our solutions play a critical role in optimizing industrial processes, increasing efficiency, and ensuring sustainable operations. As we continue to expand, we are looking for a technically proficient and highly motivated Controls Field Service Technician.
Position Overview:
The Controls Field Service Technician will be responsible for commissioning, troubleshooting, and repairing electrical control panels and automation systems at customer sites. This role involves extensive travel (approximately 60%) to customer locations to support equipment startups, provide field service, and ensure optimal system performance.
Key Responsibilities:
<ul>
<li>Travel to customer sites using company vehicles to perform startups, troubleshooting, and repairs of electrical control panels and systems.</li>
<li>Perform hands-on work with electrical systems, including wiring, PLC programming, VFDs, and automation controls.</li>
<li>Conduct service calls both onsite and via phone to support customer needs.</li>
<li>Perform inspections, testing, and repairs to meet UL(Underwriters Laboratories) and safety standards.</li>
<li>Work with pumps and pumping systems, including rotary lobe, diaphragm, and progressive cavity pumps.</li>
</ul>
<ul>
<li>Read and interpret technical drawings, schematics, and manuals to understand system design and troubleshoot problems effectively. </li>
</ul>
<ul>
<li>Provide technical support in the areas of automation controls, and industrial equipment.</li>
<li>Document service activities and communicate effectively with customers and internal teams.</li>
</ul>
Requirements
<ul>
<li>3–5 years of field service or electrical controls experience.</li>
<li>Associate degree in a technical field, military experience, or equivalent work experience.</li>
<li>Strong background in electrical controls and automation.</li>
<li>Familiarity with UL (Underwriters Laboratories) standards and certifications to govern controls.</li>
<li>Proficiency with PLCs, VFDs, and basic hand tools.</li>
<li>Knowledge of pump systems is strongly preferred</li>
</ul>
<ul>
<li>Strong problem-solving skills and ability to work independently.</li>
<li>Willingness to travel up to 60%.</li>
</ul>
Benefits
<ul>
<li>Opportunity to work with advanced industrial automation and pump technologies.</li>
<li>Company-provided vehicles and tools.</li>
<li>Competitive salary and benefits package.</li>
<li>Training and professional development opportunities.</li>
</ul>
<ul>
<li>Full benefits package including health, dental, vision, 401(k) with company match, and generous PTO.</li>
<li>A collaborative environment within a growing, globally respected organization</li>
</ul>

Controls Field Service Technician

<h3>Job Description</h3>
Job Description
Our mission is simple: we want to partner with you to find the right position for your future. Our SWAT team approach is based on our ability to align your expertise with our clients’ needs to forge long-lasting partnerships.
Gr8ttek is looking for a regular Field Specialist to join its Infrastructure Delivery team. Reporting to the Territory Supervisor the Field Specialist will perform a variety of hardware-focused, break fix services and solutions on various client products. Candidates must possess the ability to perform basic and moderately complex troubleshooting and repair activities. Position may require the exercise of moderately complex analytical skills and to make decisions based on established department and company guidelines.
Benefits:
$40 per call/$5 per call per diem Dell/Lenovo Certification Training
Responsibilities and Skills
<ul>
<li>Providing customer break fix support for designated equipment</li>
<li>Communicating clearly in written and verbal form</li>
<li>Possess excellent customer service skills</li>
<li>Accepting and delivery of all service calls assigned</li>
<li>Completing all administrative tasks associated with each call</li>
<li>Responsible for control and return of assets and inventory</li>
<li>Other duties may be assigned to meet business needs</li>
<li>May provide functional guidance to colleagues</li>
</ul>
Requirements
<ul>
<li>Typically requires technical school certification or equivalent and 1-2 years of relevant experience</li>
<li>Ability to drive yourself to client locations</li>
<li>Ability to lift and or move various computer equipment up to 50 lbs.</li>
<li>Valid driver’s license</li>
<li>Reliable transportation with valid registration and adequate insurance Additional requirements may exist if offer of employment is extended</li>
<li>Must own a basic repair tool kit</li>
</ul>
Powered by JazzHR
jL7RI5WG41

IT Field Support Technician_Bedford Heights

<h3>Job Description</h3>
Job Description
At ASG, Division of Jergens, we empower the manufacturers that transform the world. We design and deliver intuitive, user-friendly threaded fastening and assembly technology solutions that are engineered with integrity and built with pride in Cleveland, OH. Our customers push the boundaries of what’s possible in aerospace, electronics, automotive, and medical devices. They rely on us for precision, reliability, and innovation. We’re not just building products, we’re solving complex, mission-critical problems. If you’re driven by curiosity, energized by challenge, and passionate about building real products that help shape the future, read on!
The Opportunity:
We’re seeking a dynamic, hands-on engineering leader to drive us into the future of industrial technology. You will lead both new product development and continuous improvement of existing solutions. This role is central to our growth strategy and will play a key part in delivering on our vision to become the most trusted brand in threaded fastening.
You’ll lead a talented team of engineers (software, electrical, and mechanical), guiding them through the full product lifecycle, from concept to launch and beyond, while ensuring features and solutions respond to real customer needs.
What You’ll Do:
<ul>
<li>Lead and Inspire: Build, mentor, and lead a high-performing engineering team. Foster a culture of innovation, accountability, and continuous improvement.</li>
<li>Drive Product Development: Own the end-to-end engineering process; from ideation and prototyping to testing, validation, and launch.</li>
<li>Engineer for Impact: Solve the right problems thoughtfully. Design with purpose — not for engineering’s sake, but to deliver real value to customers. Ensure all engineering efforts are grounded in a deep understanding of customer needs, use cases, and pain points.</li>
<li>Engage with Customers: Collaborate directly with customers to understand their challenges solve real-world problems. This includes on-site visits, trade show interactions, and technical discussions with engineers, operators, and decision-makers.</li>
<li>Manage the Process: Bring project management expertise, implementing and refining structured development processes (e.g., Stage-Gate, Agile, hybrid, etc.). Prioritize work using frameworks like impact vs. effort or the Kano model. Ensure projects are delivered with urgency and within target budgets.</li>
<li>Collaborate Cross-Functionally: Partner with Product, Sales, Marketing, and Operations to align engineering efforts with business goals and market needs.</li>
<li>Provide Technical Oversight: Provide guidance on complex technical challenges, including mechanical design, manufacturing processes, and system integration.</li>
<li>Support Continuous Improvement: Lead value engineering initiatives, cost reduction projects, and quality improvements for existing products.</li>
<li>Contribute to Strategic Planning: Develop long-term product and technology roadmaps. Evaluate emerging technologies and trends.</li>
<li>Champion Our Values: Model humility, curiosity, and accountability. Encourage your team to uncover solutions, not shortcuts, and to always ask “how might we?”</li>
</ul>
What you Bring
<ul>
<li>Bachelor’s degree in Mechanical/Electrical/Software Engineering or related field (Master’s or PE preferred).</li>
<li>7-10+ years of engineering leadership experience in a manufacturing or industrial technology environment.</li>
<li>Proven track record of delivering complex products to market.</li>
<li>Deep understanding of manufacturing/assembly processes.</li>
<li>Strong project management skills and familiarity with structured development methodologies.</li>
<li>Excellent communication and interpersonal skills — able to influence across functions and levels.</li>
<li>High energy, high integrity, and a relentless drive to deliver results.</li>
<li>Willingness to travel to customer sites and industry events as needed.</li>
</ul>
Why Join
<ul>
<li>Be part of a mission-driven team that empowers manufacturers to transform the world.</li>
<li>Work on technically challenging and meaningful products that make a difference.</li>
<li>Join a culture that values humility, curiosity, and collaboration.</li>
<li>Enjoy growth, autonomy, and impact in a fast-moving, entrepreneurial environment.</li>
<li>Competitive compensation, benefits, and opportunities for advancement.</li>
</ul>
Company DescriptionAt ASG, Division of Jergens, we empower the manufacturers that transform the world. We design and deliver intuitive, user-friendly threaded fastening and assembly technology solutions that are engineered with integrity and built with pride in Cleveland, OH. Our customers push the boundaries of what’s possible in aerospace, electronics, automotive, and medical devices. They rely on us for precision, reliability, and innovation. We’re not just building products, we’re solving complex, mission-critical problems. If you’re driven by curiosity, energized by challenge, and passionate about building real products that help shape the future, read on! 
<h3>Company Description</h3>
At ASG, Division of Jergens, we empower the manufacturers that transform the world. We design and deliver intuitive, user-friendly threaded fastening and assembly technology solutions that are engineered with integrity and built with pride in Cleveland, OH. Our customers push the boundaries of what’s possible in aerospace, electronics, automotive, and medical devices. They rely on us for precision, reliability, and innovation. We’re not just building products, we’re solving complex, mission-critical problems. If you’re driven by curiosity, energized by challenge, and passionate about building real products that help shape the future, read on!

Director of Engineering

<h3>Job Description</h3>
Job Description
AssetWatch serves global manufacturers by powering manufacturing uptime through the delivery of an unparalleled condition monitoring experience, with a passion to care about the assets our customers care for every day. We are a devoted and capable team that includes world-renowned engineers and distinguished business leaders united by a common goal – To build the future of predictive maintenance. As we enter the next phase of rapid growth, we are seeking people to help lead the journey. 
What's the Opportunity:
The primary function of the Condition Monitoring Engineer is supporting the company's unique value proposition by generating high quality and actionable data and information for its industrial customers. This role works closely with product development, installation and customer support teams, as well as customers' reliability engineers. In this role, you will:
<ul>
<li>Collect and analyze vibration and temperature data at client sites, customizing data processing to the client's asset and determining if maintenance is needed</li>
<li>Perform vibration data collection, data analysis, software modeling and programming, and engineering evaluations</li>
<li>Evaluate machinery health and condition, through detailed analysis of vibration data</li>
<li>Develop software modelling and programs to maintain and expand vibration data analysis library to improve ability to process data</li>
<li>Provide high-quality, actionable information to clients (e.g. setting appropriate alarm levels within the analytical tools to alert customers of pending failures).</li>
<li>Accompany hardware installation team and recommend placement of machine condition sensing units.</li>
<li>Lead and grow AssetWatch predictive maintenance (PdM) tool develop program</li>
<li>Expand AssetWatch expertise in machine condition monitoring, beyond vibration analysis, to include ultrasonic analysis, oil/fluid analysis</li>
<li>Work closely with the product development team to create high-valued hardware and software solutions and expanded product offerings</li>
</ul>
Qualifications:
<ul>
<li>Minimum of five years of relevant experience with vibration data collection and analysis, ideally using FFT analyzers and predictive/preventative maintenance software. (Must demonstrate technical competence.)</li>
<li>Valid ISO Category II, or higher, vibration certification preferred. Continued certification expected.</li>
<li>Strong understanding of electro-mechanical fundamentals, including AC induction and DC motors</li>
<li>Strong mechanical background with industrial equipment - centrifugal and reciprocating compressors, turbines, blowers, pumps, gearboxes, hydraulics, pneumatics, etc.</li>
<li>Proficient with the operation of one or more analyzers measuring vibration spectra and time waveforms.</li>
<li>Proficient with developing optimum corrective actions based on findings of acquired field vibration analysis data, observations and discussions with key plant personnel.</li>
<li>Must be able to work on and around elevated fixed and rotating equipment</li>
<li>Proficiency with Microsoft Office Suite and standard PC applications.</li>
<li>Good communication and interpersonal skills</li>
<li>Desire to work in a "startup" environment and have a "startup" mentality – work collaboratively with others across all levels of the organization; resolve obstacles that may prevent the organization from achieving its mission; wear many hats as needed</li>
<li>Be customer focused - demonstrate the desire and knowledge to understand customer needs; provide personalized, professional service, accurate information and continuous communication</li>
<li>Demonstrate integrity - behave ethically, act fairly, and take responsibility for accomplishing work</li>
</ul>
#LI-REMOTE
What We Offer:
AssetWatch is a remote-first company that puts people at the center of everything we do. We want our team members to thrive - that's why we offer a range of benefits and perks designed to support your well-being, growth, and work-life balance. 
<ul>
<li>Competitive compensation package including stock options </li>
<li>Flexible work schedule </li>
<li>Comprehensive benefits including retirement plan match </li>
<li>Opportunity to make a real impact every day </li>
<li>Work with a dynamic and growing team </li>
<li>Unlimited PTO </li>
</ul>
We have a distributed team that works remotely across locations in the United States and Ontario, Canada. Collaboration within core working hours is required.

Condition Monitoring Engineer

<h3>Job Description</h3>
Job Description
Job Type: Full-time
Job Location: Hamersville, OH 
Pay: $25.00 - $30.00 per hour based on experience
Supplemental Pay:
<ul>
<li>Overtime pay</li>
<li>Performance bonus</li>
</ul>
Schedule:
<ul>
<li>Extended hours</li>
<li>Monday to Friday</li>
<li>On call</li>
</ul>
 ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&amp;M provider.
 The Solar Maintenance Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future.
This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters.
Responsibilities
<ul>
<li>Uphold a high level of safety standards in everything that you do</li>
<li>Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities</li>
<li>Willingness to learn the NEC code, electrical theory, and industry best practices</li>
<li>DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing</li>
<li>Interpret schematics to understand system layouts and connections</li>
<li>Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment</li>
<li>Maintaining company property such as vehicle, tools, meters and plant stock</li>
<li>Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory</li>
<li>Provide maintenance and troubleshooting training to technicians and others as needed</li>
<li>Identify safety hazards and take appropriate action to remove or eliminate hazards</li>
</ul>
Qualification Requirements
<ul>
<li>Familiarity with electrical systems and components</li>
<li>Proficiency in using power tools for repair tasks</li>
<li>Ability to read and interpret schematics accurately</li>
<li>Proficiency with MS Office suite</li>
<li>Ability to take direction and complete tasks with minimal oversight</li>
<li>Valid Driver's License</li>
<li>Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B</li>
<li>OSHA 10 General Industry certificate</li>
<li>Must have the ability to travel, work on-call during off-shift hours and weekends</li>
</ul>
Physical Requirements/Work Environment:
<ul>
<li>Work is to be performed outdoors at various job sites.</li>
<li>Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required.</li>
<li>Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day.</li>
<li>Must be able to lift, push, or pull up to 50 pounds on an occasional basis</li>
</ul>
Benefits:
<ul>
<li>401(k) with employer match</li>
<li>Health Insurance </li>
<li>Dental Insurance</li>
<li>Vision Insurance </li>
<li>Flexible Spending Account </li>
<li>Health Savings Account</li>
<li>Short-term and Long-term disability </li>
<li>Critical illness </li>
<li>Paid Time Off</li>
<li>Parental Leave</li>
<li>Paid Holidays</li>
<li>Employee assistance program</li>
<li>Life insurance</li>
<li>Opportunities for advancement</li>
<li>Training and Development </li>
<li>Legal and Identity Theft</li>
<li>Company vehicle </li>
<li>Pet Insurance </li>
</ul>
Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.

<h3>Job Description</h3>
Job Description
Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate &amp; land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 55+ locations and growing!
Atwell, LLC is a proud recipient of the following 2024 awards:
<ul>
<li>Nine consecutive years in a row as a "Best Place to Work" (#16) by Zweig Group</li>
<li>Recognized as #10 in the "Top 100 Fastest Growing AEC Firms" in the U.S. by Zweig Group</li>
<li>Recognized as #71 in the ENR Top 500 Design Firms, ranked in every region.</li>
<li>Recognized in Crains "Fast 50" as one of the fastest-growing firms based in Michigan.</li>
<li>Recognized in Crains Magazine as one of Michigan's largest privately held companies.</li>
</ul>
JOB SUMMARY
Atwell is seeking an Engineer to support water and gas utility infrastructure projects throughout Northeastern Ohio. This role is ideal for an early to mid-career engineer with a utility mindset who enjoys overseeing projects, working with municipalities, and driving field work forward. The work will focus on capital replacement and upgrade efforts, primarily water and gas line replacements in coordination with local municipalities.
ESSENTIAL FUNCTIONS
<ul>
<li>Oversee and support utility infrastructure projects involving water and gas line replacements, upgrades, and new development support</li>
<li>Coordinate and manage the permitting process and municipal procedures</li>
<li>Serve as a liaison between clients, municipalities, and internal teams to ensure project continuity</li>
<li>Conduct site visits within the region (local travel only) to monitor project progress</li>
<li>Collaborate with design teams and review engineering packages (AutoCAD familiarity preferred)</li>
<li>Track project timelines, budgets, and client expectations</li>
<li>Support basic capital improvement projects related to new housing and commercial developments</li>
</ul>
EDUCATION 
<ul>
<li>Bachelor's degree in Civil Engineering, Environmental Engineering, or a related field</li>
</ul>
EXPERIENCE 
<ul>
<li>2–6 years of experience in water, gas, or electric utility projects</li>
<li>Familiarity with municipal permitting processes and basic project management principles</li>
<li>AutoCAD experience preferred (not a heavy design role)</li>
<li>Strong communication skills, especially in client and municipal coordination</li>
<li>Must be based in or willing to relocate to the Boardman, OH area (local/regional travel required)</li>
</ul>
#LI-TK1
Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs.
Work/Life:
<ul>
<li>Generous Paid Time Off</li>
<li>Paid Parental Leave</li>
<li>Flexible work schedules are available for some positions</li>
<li>Tenure Awards — Travel Vouchers to see the world based on your travel preferences</li>
</ul>
Compensation:
<ul>
<li>Competitive Compensation packages </li>
<li>Annual bonuses, spot bonuses and peer recognition awards</li>
<li>401K match - 1:1 up to 4% of compensation </li>
<li>Tuition Assistance</li>
<li>Student Loan Repayment up to $25K</li>
<li>Paid Licensing / Certification Fees and Renewals</li>
<li>Financial Rewards for Obtaining Licensure</li>
<li>Employee Referrals up to $5,000</li>
<li>Annual Wellness Reimbursement up to $500 for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.)</li>
<li>Dependent Care Match</li>
</ul>
'Atwell'ness:
<ul>
<li>Medical (BC/BS), Dental (Delta), and Vision (VSP)</li>
<li>Family Planning &amp; IVF Benefits</li>
<li>Pet Insurance</li>
<li>Health Savings Account &amp; Flex Spending Account options</li>
<li>Employer paid LTD, STD, and life insurance</li>
<li>Metlife Supplemental Benefits covering accident, hospitalization, and critical illness</li>
<li>Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services</li>
</ul>

Utilities Engineer - Onsite

<h3>Job Description</h3>
Job Description
The Field Technician provides technical support to a large, varied user group. Responsible for student account creation, inventory control, and overseeing various technical projects.
Responsibilities:
<ul>
<li>Serves as integral member of the technology team and support the values, mission and goals of Constellation and its schools.</li>
<li>Utilizes organizational skills to create student network accounts with precision.</li>
<li>Manages project resources during project implementation (people, equipment, purchased services, etc.)</li>
<li>Identifies, coordinates, and oversees projects with Educational Technology Supervisor, Technology Director and other Field Technicians.</li>
<li>Supports a collaborative working environment in which technology resources are available so that staff can perform efficiently and students can be successful learners.</li>
<li>Communicates effectively with administrative staff, school principals and teachers.</li>
<li>Installs, configures, maintains and troubleshoots all:
<ul>
<li>computer hardware and software</li>
<li>projectors, Smart Boards, scanners, printers, and various peripherals</li>
<li>wired and wireless connections and devices.</li>
</ul>
</li>
<li>Processes warranty information and repair work with associated documentation.</li>
<li>Responds to all inquiries promptly.</li>
<li>Implements established hardware and software maintenance procedures.</li>
<li>Maintains an effective understanding of Information Technology as it progresses over time and contributes ideas to develop new solutions.</li>
<li>Creates and maintains detailed records &amp; notes relating to projects, hardware, procedures, etc.</li>
<li>Consistently uses official programs such as help desk ticketing, time tracking, etc.</li>
<li>Represents the organization professionally and treat everyone respectfully.</li>
<li>Adheres to the Staff Handbook and all Constellation Policies.</li>
<li>Performs other duties as assigned by the Technology Director, CFO and/or Executive Director.</li>
</ul>
Skills, Knowledge, Abilities Required: 
<ul>
<li>Associate Degree in Computer Science, programming or related field, or substantial experience with Windows based computers, software and networking.</li>
<li>Minimum 3 years of experience in a similar Technical Support role.</li>
<li>1 year experience within a school setting required.</li>
<li>Valid Ohio drivers license.</li>
<li>Work history demonstrating increasing levels of responsibility and leadership.</li>
<li>Strong interpersonal skills and ability to educate users as well as provide straight technical support.</li>
<li>Exceptional communication skills, with a focus on rapport-building, listening, and questioning skills.</li>
<li>Experience with installation, maintenance and support of a large fleet / user base.</li>
<li>Experience with a wide variety of hardware and software, as typically used in an education environment.</li>
<li>Ability to work effectively and cooperatively with staff, maintain the confidentiality of privileged information and follow oral and written instructions.</li>
<li>Must be highly organized and detail oriented.</li>
<li>Willingness and ability to adjust to changing conditions or priorities.</li>
<li>Ability to multi-task and handle frequent interruptions.</li>
<li>Ability to consistently follow protocol and instructions.</li>
<li>Ability to work effectively both independently, and with a team.</li>
<li>Ability to lift 50 lbs. and work in a physically demanding environment as needed.</li>
</ul>
EQUAL EMPLOYMENT OPPORTUNITY
It is our policy to abide by all federal, state and local laws prohibiting employment discrimination based solely on a person's race, color, religious creed, sex, national origin, ancestry, citizenship status, pregnancy, childbirth, physical disability, mental and/or intellectual disability, age, military status, veteran status (including protected veterans), marital status, registered domestic partner or civil union status, familial status, gender (including sex stereotyping and gender identity or expression), medical condition, genetic information, sexual orientation, or any other protected status except where a reasonable, bonafide occupational qualification exists.
#LI-KM2
#INDCORP

Field Technician

<h3>Job Description</h3>
Job Description
At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals &amp; Mining, Warehousing &amp; Distribution, and CPG/Food &amp; Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. 
We are seeking an Advanced Ignition Engineer with expertise in Inductive Automation Ignition to lead the design, development, and deployment of SCADA, IIoT, and industrial automation solutions. Responsibilities include implementation, testing and startup of technical solutions created by yourself or others. You will work closely with cross-functional teams, integrating industrial systems, and ensuring high-performance, scalable, and secure automation applications.
You will:
<ul>
<li>Design, develop, and implement Ignition-based SCADA and IIoT solutions for industrial automation projects.</li>
<li>Be the technical lead for Ignition architecture, including Gateway configuration, Perspective, Vision, and SQL databases.</li>
<li>Design and configure PLC/SCADA networks</li>
<li>Work cooperatively with engineering, design, production, and field service staff</li>
<li>Aware of Project budget and schedules for the purpose of recognizing and communicating issues to PMs before becoming a conflict</li>
<li>Develop overall system architecture for industrial control projects</li>
<li>Specify and configure various hardware components such as, instrumentation, PLCs, communication systems and industrial control panels</li>
<li>Perform functional testing of electrical and control systems</li>
<li>Mentor and train engineers, providing technical guidance and Ignition best practices.</li>
<li>Coordinate start-up activities within ETG, any contractors and owner personnel</li>
<li>Develop and Lead training classes internally and externally</li>
<li>Create tools, methods and approaches to increase engineering efficiency</li>
<li>Assist Business development team to evaluate and promote opportunities with predesigns, estimates, and in person presentations</li>
<li>Serve as an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. </li>
</ul>
You have:
<ul>
<li>Bachelor's Degree in Engineering or equivalent experience.</li>
<li>10+ years of experience in the control system industry. </li>
<li>7+ years of hands-on experience with Inductive Automation Ignition (Perspective, Vision, SQL, Tag Historian, Scripting).</li>
<li>Strong understanding of controls systems.</li>
<li>Ability to develop PLC and HMI programs within one or more languages</li>
<li>Experience commissioning in "live" environments. .</li>
<li>Willingness to travel 50%</li>
<li>Self Starter, organized, and proactive communicator</li>
<li>Current Gold certified in Ignition</li>
<li>A DNA comprised of collaboration and teamwork. </li>
</ul>
Benefits &amp; Perks:
<ul>
<li>401k + match + prompt enrollment.  E Tech Group employees are 100% vested upon entry. </li>
<li>Prompt enrollment into Medical, Dental, and Vision benefits. </li>
<li>Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. </li>
<li>Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. </li>
</ul>
E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.
#LI-HY1

Advanced Ignition Engineer

<h3>Job Description</h3>
Job Description
At PEARCE, we've got a career for you!
Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets.
Your Impact:
Pearce Services/ Unified Power is seeking a Critical Power Field Technician (UPS Field Engineer) for Cincinnati, OH, and surrounding areas, with a commitment to excellence and a strong desire to succeed and learn new skills. As a Critical Power Technician, you will directly support our customers in the onsite preventive, corrective and restorative maintenance of their critical power systems (i.e., UPS, DC systems, inverters, PDUs, STS, and standalone reserve battery technologies). As a UPS Field Service Engineer for Unified Power, you will possess and utilize the hit-the-ground running and think-outside-of-the-box mentalities that drive swift and superb solutions that address our customers needs.
Core Responsibilities:
<ul>
<li> Install electrical equipment such as small rack mounted UPS equipment, various size batteries, UPS/Battery monitoring equipment.</li>
<li> Maintain Battery Cabinets and racks, Maintenance Bypass', Battery Monitoring Equipment, DC Systems and other electrical equipment.</li>
<li> Periodic and lifecycle-driven performance of remedial services, including failure analysis and troubleshooting, component replacements and repairs, and battery string replacements and installations.</li>
<li> Customer relationship building – provide excellent customer service; upsell products.</li>
<li> Field troubleshooting calls from customers to satisfactory resolution.</li>
<li> Quickly respond to critical situations.</li>
<li> Teach and mentor crew members on proper techniques for site work, troubleshooting, repair and analyzing site data.</li>
<li> Isolate basic hardware, software, and interface malfunctions utilizing various test equipment on multiple products and technologies.</li>
<li>Specific duties may vary or evolve over time based on business and client needs.</li>
</ul>
Core Experience
<ul>
<li> Prior military training in electronics or avionics (A School, AIT, etc.) preferred.</li>
<li> Minimum of three (3) years serving in a third-party critical power field service or technical support role with a demonstrated progression in technical proficiency and capability -OR-</li>
<li> Minimum of five (5) years serving in an OEM service environment in the critical power space.</li>
<li> Good understanding of AC/DC electrical principles.</li>
<li> Knowledge of test equipment operation, such as multi-meters, and battery test equipment.</li>
<li> Read and interpret electronics schematics with the ability to troubleshoot failures/faults to the component level.</li>
<li> Understand and have experience enforcing compliance with FCC/FAA/EPA/OSHA regulations and standards.</li>
<li> Outstanding work ethic, punctual, trustworthy, and reliable – you will set the pace as a senior UPS/ Critical Power Engineer.</li>
<li> Good judgment with the ability to make timely and sound decisions within fast paced changing priorities.</li>
</ul>
Physical/Work Environment
<ul>
<li>At Pearce safety is our number one concern. Candidates must be able to comply with OSHA and applicable DOT Standards.</li>
<li> Must have a valid driver's license with an acceptable driving record (if driving a Company Vehicle) and pass a pre-employment drug screen.</li>
<li>Ability to lift and/or move up to 100 pounds for short durations.</li>
<li>Ability to kneel or crouch periodically.</li>
<li>Ability to stand for extended periods of time.</li>
<li> Ability to travel for multiple days with Per Diem as projects require.</li>
<li> Coordinate multiple tasks simultaneously while maintaining 100% safety awareness.</li>
<li> Lifting heavy objects and stretching above your head</li>
</ul>
Compensation: $35 -$ 45, depending on experience.
At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location.
In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package includinghealth and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses.
This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process.
Base Pay Range$35—$45 USD
What We Offer
Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment.
At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings.
Learn more about us at <a href="http://www.Pearce-Services.com" target="_blank">www.Pearce-Services.com</a>!

1,119 Engineering Jobs